Analysis Potential Factors Affecting Laser Cutting Machine

2020-05-10 06:04:57

Analysis Potential Factors Affecting Laser Cutting Machine 1. Three areas of laser power (overburned zone, defect free zone, dross zone) 1). Over-burning zone: When the laser power is too large, the heat input is too large, so that the melting range of the workpiece is larger than the range that can be driven out by the high-pressure airflow, and the molten metal is not blown off by the airflow to generate over-burning. 2). No defect area: The laser power is in suitable range, the cutting effect at this time is good, it is called defect-free area. 3). Hanging slag area: When the laser power is too small, the heat is insufficient, the lower temperature of the molten product near the lower edge, and higher viscosity, so it cannot be blown off by the high-pressure airflow and stays at lower edge of the cutting surface to produce dross, at severe cases, the incision cannot be cut. <a href="https://www.honzhanmachines.com/Index/index/productdetail/Fiber-Laser-Marking-Machine.html" target="_blank"><img border="0" src="https://www.honzhanmachines.com/static/upload/20200510/Fiber Laser Marking Machine (3).jpg" title="image" /></a> HONZHAN Brand 20W 30W 50W Fiber Laser Marking Machine use Raycus IPG JPT Laser Source <img src="https://www.honzhanmachines.com/static/upload/20200510/Alice Wang Honzhan.png" style="border-width: 0px; border-style: solid; width: 700px; height: 333px;" title="image" />