Basic maintenance and parameter setting of advertising CNC router machine

2019-10-17 22:25:24

1. continuous running time within 10 hours per day, ensure the cleaning of the cooling water and the normal operation of the pump, never make the water spindle motor run out of water. Replace the cooling water regularly to prevent the water temperature from being too high. In winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze. 2. After each use of the machine, it is necessary to clean it in time. It is necessary to clean the dust on the platform and the transmission system, and regularly (weekly) lubricate the transmission system (X, Y, Z three axes). (Note: X, Y, Z three-axis guide rails are maintained with engine oil; ball screw parts are added with high-speed butter) In winter, if the working environment temperature is too low, the ball screw and the linear rail part should be cleaned with gasoline first, then the engine oil will be added. Otherwise, the resistance of the machine transmission part will be too large and the machine will be misaligned. 3. When performing maintenance inspection on the electrical appliance, be sure to turn off the power supply, and wait until the monitor has no display and the main circuit power indicator is off. 4. Modification of CNC engraving machine parameters (Weihong NcStudio system):  Manufacturer parameter modification, (enter password: NCSTUDIO click "OK") Table travel: (depending on the model of the machine) System parameters: The first four items are selected on the default basis. Motor parameters: 0.00625 if the lead is 10                 If the lead is 5 then 0.003125 Take-off frequency: 300 Z axis maximum speed: 1000 Uniaxial acceleration: 400 Curved acceleration: 300 <a href="https://www.honzhanmachines.com/Index/index/productdetail/6090-CNC-Router-with-water-sink-for-aluminum-cutting.html" target="_blank"><img border="0" src="/static/upload/8a5d81f6ed4737a8/a1f97945a018ac2a.jpg" title="image" /></a>